Pimtaş U-PVC Cross

A cross is the four-way fitting: from a single point it feeds two opposing branches at once, or collects two branches into one line. On distribution manifolds that serve several floor returns, massage jets or nozzles, it builds a symmetrical split with one body instead of two tees placed back to back. That shortens the run and reduces the number of joints.

Because all four branches are fed from one point, the flow split is sensitive. If the branches differ much in length or height, some outlets will run weak, so the branch routes are planned for balance and, where needed, each branch gets its own regulating valve. A cross also means four joints in one part: all four must be cleaned and cemented with equal care, since a single weak joint means dismantling the whole distribution point.

The Pimtaş cross comes in 50 and 63 mm with solvent-weld sockets. It belongs on a properly supported route, not at a point under strain or left unbraced.