Selenoid Liquid pH Reducer

Around Çeşme, pools are usually filled with hard mains water of high alkalinity, and over time that water pushes the pH upwards. Selenoid liquid pH reducer brings a rising pH back down and holds the water in the comfortable 7.2-7.6 range. Above that band chlorine becomes less effective, the water starts to deposit scale, and build-up appears on filter and heater surfaces.

The 25 kg drum suits villa pools and residential complexes on a weekly maintenance routine: it can be measured out and applied directly, needs no dissolving step, and on installations with an automatic pH controller the suction hose can be dropped straight into the drum. The correct order is to test first, add the amount stated on the label, then circulate and measure again. Bringing total alkalinity into the 80-120 ppm range before adjusting pH keeps the value from drifting back within days.

Keep the drum in a cool, dry, ventilated place, separate from chlorine products; acid and chlorine must never be stored side by side or combined in the same container. Wearing gloves and eye protection during application is a good habit.